360nm紫外光纤耦合激光器
FCSM360SXXLC1P0 （SM)
FCSM360MXXLC1P0（MM)
所属类别：
紫外激光器
固体激光器
单模激光器
多模激光器
光纤耦合激光器
-
360nm Fiber Coupled Laser Module
The fiber coupled DPSS laser module is a temperature stabilized Diode-Pumped Solid-State laser coupled with SM /PM /MM fiber. It integrated the thermoelectric cooler, modulation and protection electronics in a compact package.
Module features very low M2 value Gauss beam output with excellent beam pointing stability at a wide temperature dynamic range. The special designed electrical driver enable this optical engine has the lowest power consumptions compare to the similar product in the industry.
This component does not comply with the Federal Regulations (21 CFR Subchapter1 ) as administered by the Center for Devices and Radiological health. Purchaser acknowledges that his/her products must comply with these regulations before they can be sold to a customer. The output light from this product is harmful to a human body even if it is invisible. Avoid looking at the output of this product directly, or through a lens during operation. Observance of operation should be through a TV camera or related equipment. Refer to IEC 825-1 and 21 CFR 1040.10-1040.11 as a radiation safety standard for laser products.
-
-
Wavelength360nm
-
Transverse ModeSingle Mode / Multi-mode
-
Output Power @ T=25 °C, CW20~150mW
-
Power stability @25 °C, 4Hrs5%,3%,2%
-
M2 Factor1.1 （PM / SM）
-
Collimator Beam Size(1/e2, SM)Optional
-
Beam divergence(Full angle, SM)1mrad（PM / SM）
-
Pointing Stability (4hrs,T=25 °C,SM)5urad（PM / SM）
-
Warm-up Time<10 minutes
-
Fiber Length1~3m
-
Fiber typePM / SM / MM
-
Mode field diameter1~2um（SM）/ 50~200um（MM）
-
NA0.13（SM） / 0.22（MM）
-
Cable Diameter3mm
-
ConnectorFC-PC /SMA905
-
Power supply100~230V
-
Cooling MethodWater /Air
-
Storage Temperature0~50℃
-
Operation Temperature10~35℃
-
Operation HumidityNon Condensing
-
